WAS
CHOOSING THE RIGHT UVOX REDOX® SYSTEM
At UVOX, we’re dedicated to helping you select the ideal UVOX Redox® system for your water treatment needs.
We believe in finding sustainable water solutions together.
To get started, we invite you to explore our offerings, which offer a range of options to give you an idea of what we can deliver. However, we understand that every customer has unique requirements. That’s why we offer flexibility in tailoring a suitable solution specifically for you. By considering factors such as your water quality challenges, capacity needs, and budget, we can design a customized system.
CHOOSING THE RIGHT UVOX REDOX® SYSTEM
A pre-requiste for the UVOX System is a defined UV irradiation dose rate measured in mJ/cm² at the end of the service life of the UVOX Lamp.
THIS MINIMUM UV-INTENSITY IS A FUNCTION OF:
- lamp efficiency (Lamp Output in UV-C)
- retention or dwell time of the cells exposed to UV-C light, which results in the flow rate through reaction chamber
- the UV-Transmission through the fluid, which is determined by the layer density and the clouding of the water.
DEPENDING UPON THE APPLICATION UVOX GUARANTEES A CERTAIN MINIMUM UV- INTENSITY (IN MJ/ CM²):
| Class | Application | UV-Intensity |
|---|---|---|
| A | Drinking Water | 25,00 mJ/cm2 |
| B | Process Water | 12,50 mJ/cm2 |
| C | Swimming pools | 12,50 mJ/cm2 |
| D | Natural Pools, Swimming ponds (without Algae) | 25,00 mJ/cm2 |
| E | Waste Water | 50,00 mJ/cm2 |
CONTROL BY MEASUREMENTS
The UVOX Redox® UV-Compact measures the UV intensity of the water, the water temperature and the internal temperature of the system. This ensures the proper functioning of the UVOX Redox® purification system.
A Redox measurement provides information about the currently existing oxidation power of the water. The increase of the redox potential due to the ozone supply is informative. For some process water applications, the UVOX Redox® Pilot therefore measures the redox potential in two places: once before and once after the ozone injection. This allows an optimal and stepless adjustment of the ozone supply for the best possible result.
AS RESULT OF THIS YOU CAN SELECT YOUR UVOX SYSTEM:
UV-TRANSMISSION AT T=10 / 90%
| UVOX-System | flow rate m³/h in different classes: | ||||
|---|---|---|---|---|---|
| A | B | C | D | E | |
| UVOX-400 | 12,80 | 25,40 | 25,40 | 12,50 | 6,25 |
| UVOX-450 | 14,40 | 28,80 | 28,40 | 14,40 | 7,20 |
| UVOX-1000 | 25,00 | 50,00 | 50,00 | 25,00 | 12,25 |
| UVOX-1500 | 40,00 | 80,00 | 80,00 | 40,00 | 20,00 |
| UVOX-2000 | 65,00 | 110,00 | 110,00 | 65,00 | 32,50 |
Solutions
Choosing the right UVOX Redox® system
UVOX Redox® – kundenspezifisch (O.E.M.)
UVOX Redox® 400 / 450 UV-Kompakt
UVOX Redox® Spareparts
System components 2023 / 2024
| 250.02.01 | Quartz sleeve |
| 250.02.02 | Wapure H-020 100 Watt |
| 250.02.03 | Starter Auasar 12 |
| 450.02.50 | UVOX Redox Thermospectral 180 Watt |
| 450.02.52 | UVOX Redox Thermospectral 200 Watt PH |
| 450.02.55 | UVOX Redox Thermospectral 200 Watt PH/ NLS |
| 250.03.01 | O-Ring Viton 51414 32×5 (for Quarzsleeve) |
| 250.03 | O-Ring Viton complete set of O-rings |
| 250.06.12 | Closing nut for quartz sleeve (up) |
| 450.06.06 | Closing nut und cooling food with spring for quartz sleeve |
| 250.06.071 | Closing nut for sensors |
| 250.06.072 | Closing nut with bull eye |
| 450.10 | Electronic ballast for UVOX 400/450 in mounting cabinet |
| 450.49.01 | Electronic ballast 160-200 W/ 2A Pre Heat PH |
| 450.49.02 |
UV Compact new generation PH
UVOX Redox UV- Compact measuserment and control system for measuring and safe operation of a single lamp UVOX Redox systems. Funktionen: - measuring of the UV-C intensity - measuring of the internal, and external temperature - controlling of system operation, due to measurement of internal, external temperature, and UV Intensity - Counter of operation hours and system hours - electronic ballast |
| 450.49.05 | Digitale UV-Sensor Edelstahl inkl. O-Ring |
| 450.49.06 | Digitale Temperatur Sensor inkl. O-Ring |
| 450.49.08 |
Digitale UV-Sensor : D-SicT141-LP Messbereich: 2-500W/m² Gehäusematerieal: Teflon(PTFE) |
| 250.55.01 |
UVOX-Redox Pool / Pond / Test Pilot For For operating and controling pool / pond water the UVOX Redox Pilot is analogue but reliable device to measure and control water parameters. |
| 2000.70.03 | UVOX Redox Power and Controll module for controling and operating multi-lamp systems. |
| 450.20.02 | Inline Injector with (black) venturi injector (sparepart) |
| 450.20.03 | Inline Injector with (blue) venturi injector (sparepart) |
| 20.30.01 | Venturi inline injector black (Component) for flow capacities of 8 – 14,4 m³ per hours |
| 20.20.03 | Venturi inline injector blue(component) for flow capacites of < than 8m³ or < 14 m³ und < 8 m³ |
| 20.35.02 | Ozone resistant hose in PVDF 1 m (weiß) for AOP incl. 1 Hose bending connection PVDF |
| 20.34.01 | none return valve in PVDF |
| 450. 51. 01 |
Boosterpumpe A: Ausführung S mit Viton O-Ring und X15P Gleitringdichtung Leitungsdruckverhältniss < 0,5 Bar und /oder max. Fördermengen 5-10 m³ /Std. |
| 450. 51. 02 |
Boosterpumpe B: Ausführung S mit Viton O-Ring und X15P Gleitringdichtung Leitungsdruckverhältniss 0,5 bis 0,9 Bar oder max. Fördermengen 10-22 m³ / Std. |
| 450. 51. 03 |
Boosterpumpe C: Ausführung S mit Viton O-Ring und X15P Gleitringdichtung Leistungdruckverhältnisse < 1,3 bar und / oder max. Fördermengen > 22 m³ / Std. |
| 250.38.07 | Bended hose connection PVDF |
| 250.34.01 | none-return valve PVDF |
| 450.02.65 | Ceramic female lamp socket for UVOX 450.02.55 lamp incl. Teflon cables |
| 240.02.75N | Mounting plate for Lamp socket (complete system component) |
Need a spare part?
To help us quickly and effectively process your order for replacement parts, please complete the form below or send us an email directly at info@uvox.com. Remember to include the serial number of your product and clearly state the specific part you require. Don’t forget to provide your contact details so we can get in touch with you as soon as possible.
